A corner flat is located at the end of the building: that is, a part of its walls aren’t adjacent to the interiors, however would be the outer walls of the home.
There may be one flat at a corner flat – it occupies the whole end of the home, it’s likewise referred to as a corner apartment. Or 2 – that the windows of a overlook the street, the second – the yard. Depends on the building program, the layout of the assumptions.
There’s also a”separate caste” – casing with walls at the expansion joints. These”gaps” between entrances are typically made in multi-story buildings, the principal task of the unit – to split the deformation forces through the shrinkage of this construction, in the event of crises. Pros and cons of both corner flats in the joint are slightly different from the normal ones with access to the street – we’ll pay particular attention to the topic in the past section.
Because the 2-3 sides of the space is outdoors, domikday.ru in winter it is 3-5C colder, and in summer on the contrary – warmer. Particularly if the end of the home is heated by sunlight. Sometimes, the difference reaches 10C – but such a distinction is improper, suggests that a problem with the outside of the home – most likely have to get in touch with the management company, requesting (or forcing) to fulfill their direct responsibilities, to spot the cracks formed.
Corner flat in a brick house with thick walls is more comfy. Such dangers aren’t subjected – the thickness of the wall acts as a buffer, so not allowing overheating, overcooling.
When a room has only one wall combined with the road, it generally has sufficient room warmth to avoid freezing and warmth. However, when there are two outdoor walls, and they’re adjacent – there is a higher probability of freezing at the corner, the creation of condensation inside, and consequently – mould, fungus. Their spores not only spoil the overall look of the room, but also cause the appearance, complication of many serious ailments.
Important! The problems of corner location are compounded when the variables are linked – too low temperatures from heating batteries together with dampness is certain to lead to moldy walls.